創客空間寄放注意事項更新 Updated Maker Space Items Deposit Rules

各位使用者好：
為了更有效的管理創客空間，確保各位的使用權益，即日起，創客空間的寄放以紙本方式登記。請詳閱注意事項並填妥表格，將表格撕下固定於寄放的物品上。

1. 本空間寄放的物品僅限於半成品，須具備以下所有條件：
● 已切割、列印、黏貼等處理，尚未完成組裝、上色、打磨、轉印等物品；
● 附有製作說明或預計用途，例如附上備註紙條或標籤註記階段進度；
以下情況不視為半成品，恕不接受寄放：
● 完全未加工的原物料（如全新木板或壓克力板、PLA線材、樹酯、未黏貼轉印紙的熱轉印耗材）；
● 無標示、無進度說明、完成品或明顯不會再進行加工的成品。
▲雷切機加工後的板材請協助裁切已使用過的部分，請勿超出櫃子放置範圍
2. 寄放物品的寄放日期應明確登記，並於15日內取回。超過使用期限未取回的物品將視為轉讓創客空間清理權限，創客空間概不負責。
3. 創客僅提供寄放空間，不負物品保管之責。
4. 請使用者配合空間指示，於指定位置整齊擺放，並請勿超出位置範圍，且放滿為止；未於指定位置寄放者，將由創客空間視為轉讓創客空間清理權限。
5. 禁止寄放任何危險物品、易燃物品等。
6. 創客空間保留異動權限，相關資訊將於創客官網更新，請使用者留意。

* 請於櫃檯填寫登記表。
Hello to all users of Maker Space,

To manage the makerspace more effectively and ensure your rights, starting today, the deposit of items will be registered using a paper form. Please carefully read the rules:

1. Only semi-finished items are allowed for deposit. These must meet ALL of the following:
● Processed (cut, 3D printed, glued, etc.), but not fully assemble, painted, sanded, or heat-transferred.
● Includes documentation or a label showing the production stage or intended use.
Not accepted:
● Unprocessed raw materials (e.g., unused wood, PLA filament, resin, un-applied heat transfer materials).
● Unlabeled, finished items, or items that won’t be further processed.
▲Please trim used sections of laser-cut boards and ensure they do not extend beyond the storage area.
2. Store date must be recorded. Items must be retrieved within 15 days. Items not retrieved will be considered abandoned, and the makerspace will dispose of them.
3. The makerspace provides storage space only, not safekeeping.
4. Place items in designated areas within specified limits. Incorrectly placed items will be considered abandoned and disposed of.
5. No hazardous or flammable items allowed.
6. The makerspace reserves the right to make changes. Updates will be posted on the official website.

* The form is available at the front desk.